手机棋牌游戏平台

手机棋牌游戏平台|手机捕鱼平台|手机千炮捕鱼|牛牛游戏下载

发表于:2016-08-10更新|标签:防护标准

       焊接防护服标准GB-15701-1995JZO完整文件免费下载

       焊接防护服涵盖阻燃防护服指的是以织物、皮革或通过贴膜和喷涂铝等物质制成的织物面料、并采用缝制工艺制作的、以防御焊接时的熔融金属、火花和高温灼烧人体的防护类服装。

       焊接防护服标准GB--15701-1995JZO(以下简称该标准)属于中华人民共合作国家标准下属范畴,由国家技术监督局1995-09-11批准,1996-03-01起实施。

一、主题内容与适用范围
  该标准规定了焊接防护服的分类、技术要求、试验方法、检验规则、标志、包装、运输与贮存。适用于以织物、皮革或通过贴膜或喷涂制成的织物为面料,采用缝制工艺制作的焊接防护服。
  二、引用标准
   GB 4689 皮革成品物理化学性能试验方法
  GB 5455 纺织织物 阻燃性能测定 垂直法
  GB/T 12703 纺织品静电测试方法
  GB 13640 劳动防护服号型
  GB/T 13661 一般防护服

GB 2661 男女单服装
  三、分类
  该标准将焊接防护服分为两类:
 1.上、下身分离式;
 2.衣裤连体式。
  注:均可配用围裙、套袖、披肩、鞋盖等附件。
  四、技术要求、
  该标准对焊接防护服的面、辅材料性能、材料种类、辅料(包括缝纫线和纽扣材质)的性能作出了明确的参数要求。包括面料的阻燃性能、抗撕裂性、防金属熔滴冲击性、抗电性,以及辅料的强力、材质、阻燃性、号型、缝制要求、外观等都作出了明确的规定。

五、试验方法
 1.棉织物面料检验按GB/T 136616.5的规定进行。
 2. 皮革面料的检验按GB 4689的规定进行。
 3. 阻燃性能按GB 5455的规定进行。
 4 .防金属熔滴冲击性能按附录A(补充件)的规定进行。
 5. 抗电性能按GB/T 127037.3的规定进行。
 6. 成品的规格和缝纫质量检验按4.2~4.3的规定逐项检验。
  六、检验规则
 1. 焊接防护服的检验分为型式检验和出厂检验两类,检验项目和不合格分类应符合表2、表3的要求。
 2. 出厂检验按批量进行,以供货批为检查批,也可由厂需双方协商确定。被检焊接防护服应从检查批中随机抽取。
 3. 检验及抽样按GB/T 13661 8.5~8.8的规定进行。
  七、 标志、包装、运输和贮存
 1 .每件产品需有厂名、商标、号型和检验合格证。外包装上应有厂名、商品名称、货号、数量及出厂日期。
  2. 包装应整齐牢固、数量准确,在产品与外包装间应设防潮隔层;外包装有特殊要求时由供需双方商定。
    3 .产品运输不得损坏包装,要防止日晒雨淋。
  4. 产品应在阴凉、干燥、通风的地方贮存。

        由于篇幅缘故,耐戈小编暂将焊接防护服的标准GB-15701-1995JZO以概述的形式阐述到这里,如果有该方面需求的朋友,可以到耐戈友的官方网站联系客服索要。当然,耐戈友自身生产的该类产品(阻燃防护服,防电弧服,反光防护服等)也是严格遵照此标准以及其他国标、欧标来进行设计生产的

  附加说明:
  本标准由中华人民共和国劳动部提出。
  本标准由全国劳动防护用品标准化技术委员会归口。
  本标准由冶金部建筑研究总院负责起草。
  本标准主要起草人洪军、白孝良。
  

免费下载地址http://www.uabhs.net/download/GB15701-1995JZO.pdf

下一篇:一般防护服标准GB/T13661-1992      本文由耐戈友整理发布,转载请注明出处!

发表于:2014-08-25更新|标签:防护标准

BS EN 1149-5-2008-Protective clothing —Electrostatic properties (防护服-防静电服英国/欧洲标准)

 Material performance anddesign requirements

ICS 13.340.10

BS EN 1149-5:2008

This British Standard was

published under the authority

of the Standards Policy and

Strategy Committee

on 31 March 2008

? BSI 2008

ISBN 978 0 580 54878 9

National foreword

This British Standard is the UK implementation of EN 1149-5:2008.

The UK participation in its preparation was entrusted to Technical Committee

PH/3, Protective clothing.

A list of organizations represented on this committee can be obtained on

request to its secretary.

This publication does not purport to include all the necessary provisions of a

contract. Users are responsible for its correct application.

Compliance with a British Standard cannot confer immunity from

legal obligations.

Amendments/corrigenda issued since publication

Date Comments

EUROPEAN STANDARD

NORME EUROPéENNE

EUROP?ISCHE NORM

EN 1149-5

January 2008

ICS 13.340.10

English Version

Protective clothing - Electrostatic properties - Part 5: Material

performance and design requirements

Vêtements de protection - Propriétés électrostatiques -

Partie 5: Exigences de performance des matériaux et de

conception

Schutzkleidung - Elektrostatische Eigenschaften - Teil 5:

Leistungsanforderungen an Material und

Konstruktionsanforderungen

This European Standard was approved by CEN on 10 November 2007.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITé EUROPéEN DE NORMALISATION

EUROP?ISCHES KOMITEE FüR NORMUNG

Management Centre: rue de Stassart, 36 B-1050 Brussels

? 2008 CEN All rights of exploitation in any form and by any means reserved

worldwide for CEN national Members.

Ref. No. EN 1149-5:2008: E

 

由于BS EN 1149-5-2008_防静电服英国/欧洲标准篇幅过长的缘故,耐戈友小编暂将简介内容概述如上,如有网友有兴趣了解关于该标准的完整版本信息,请联系耐戈友网站客服索要。

下一篇:BS EN 533-1997_阻燃防护服英国/欧洲标准          本文由耐戈友整理发布,转载请注明出处!

                                                                          链接地址 http://www.uabhs.net/?article-186.html

发表于:2014-08-25更新|标签:防护标准

BS EN 533-1997_Protective clothing -Protection against heat andflame -Limited flame spread materials and material assemblies(防护服-阻燃防护服英国/欧洲标准)

 Committees responsible for this

British Standard

The preparation of this British Standard was entrusted by Technical Committee

PH/3, Protective clothing, to Subcommittee PH/3/2, Clothing for protection against

heat and flame, upon which the following bodies were represented:

BAA Plc

British Apparel and Textile Confederation

British Clothing Industry Association

British Iron and Steel Producers' Association

British Leather Confederation

British Measurement and Testing Association

British Railways Board

British Safety Industry Federation

British Textile Technology Group

Chemical Industries' Association

Chief and Assistant Chief Fire Officers' Association

Civil Aviation Authority

Confederation of British Wool Textiles Limited

Health and Safety Executive

Home Office

Institution of Fire Engineers

London Fire and Civil Defence Authority

Made-Up Textiles' Association

Ministry of Defence

Safety Equipment Association

SATRA Footwear Technology Centre

Textile Services' Association Ltd.

Trades Union Congress


Welding Manufacturers' Association (BEAMA Lt.)

BS EN 533 : 1997

ó BSI 1997 i

National foreword

This British Standard has been prepared by Subcommittee PH/3/2 and is the English

language version of EN 533 : 1997 Protective clothing D Protection against heat and

flame D Limited flame spread materials and material assemblies published by the

European Committee for Standardization (CEN). It supersedes BS 6249 : Part 1 : 1982,

which is withdrawn.

NOTE. International and European Standards, as well as overseas standards, are available from

Customer Services, BSI, 389 Chiswick High Road, London W4 4AL.

Compliance with a British Standard does not of itself confer immunity

from legal obligations.

Summary of pages

This document comprises a front cover, an inside front cover, pages i and ii, the EN

title page, pages 2 to 6, an inside back cover and a back cover.

CEN

European Committee for Standardization

Comite? Europe?en de Normalisation

Europaèisches Komitee fuè r Normung

Central Secretariat: rue de Stassart 36, B-1050 Brussels

ó 1997 Copyright reserved to CEN members

Ref. No. EN 533 : 1997 E

EUROPEAN STANDARD EN 533

NORME EUROPE?ENNE

EUROPAè ISCHE NORM January 1997

ICS 13.340.10

Descriptors: Personal protective equipment, protective clothing, heat protection, fire resistant materials, specifications, tests,

flame propagation, marking

English version

Protective clothing D Protection against heat and flame D Limited

flame spread materials and material assemblies

Ve?tements de protection D Protection contre la

chaleur et la flamme D Mate?riaux et assemblages

de mate?riaux aá propagation de flamme limite?e

Schutzkleidung D Schutz gegen Hitze und

Flammen D Materialien und

Materialkombinationen mit begrenzter

Flammenausbreitung

This European Standard was approved by CEN on 1996-11-07. CEN members are

bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

conditions for giving this European Standard the status of a national standard

without any alteration.

Up-to-date lists and bibliographical references concerning such national standards

may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German).

A version in any other language made by translation under the responsibility of a

CEN member into its own language and notified to the Central Secretariat has the

same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Denmark,

Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,

Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

由于篇幅缘故,关于BS EN 533-1997_阻燃防护服的英国/欧洲标准,耐戈友小编暂将简介内容概述如上,完整版本防护服标准信息,请联系耐戈友网站客服索要。

下一篇:BS EN 343-2003+A1-2007防雨防护服英国|欧洲标准    本文由耐戈友整理发布,转载请注明出处!

                                                                                    链接地址 http://www.uabhs.net/?article-185.html

.

发表于:2014-08-21更新|标签:防护标准


ISO 20471-2013 High Visibility Clothing - Test Methods and Requirements

(高可视性警示服的测试方法及要求)

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 20471 was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13, Protective clothing.

This corrected version of ISO 20471:2013 incorporates the following correction:

·       — in the fourth paragraph of subclause 4.1 the requirement concerning the sleeves of a class 3 garment has been corrected.

Introduction

The performance of the conspicuity-enhancing materials to be used for high risk-related visibility clothing is specified photometrically together with minimum areas and placement (design) requirements.

Conspicuity is the property that makes an object readily attract visual attention. This is a particularly important feature in complex environments which have visually competing objects. Conspicuity is determined by an object’s luminance contrast, colour contrast, pattern and design, and motion characteristics relative to the ambient background against which it is seen.

Three classes of garment are defined based on three different minimum areas of retroreflective, fluorescent and/or combined performance materials. Each of these classes will provide a different level of conspicuity, class 3 being the class that provides the highest degree of conspicuity against most backgrounds found in urban and rural situations in daylight and in night time. Users should select the required class of performance based on a risk assessment of the location/situation in which the protection afforded by clothing to this International Standard is required.

This International Standard contains requirements relating to risk assessment and risk analysis of high visibility garments. Possible designs illustrating the placement of retroreflective materials are included within the standard. Ergonomic factors such as fit/sizing, comfort, and range of motion of the wearer should be considered when selecting the most appropriate configuration of retroreflective and fluorescent materials within the garment.

Selection and use of high visibility clothing can vary among user countries and may be subject to local regulations. This International Standard contains requirements relating to risk assessment of the condition in which the high visibility clothing is to be used. This will involve consideration of the factors which may affect an observer’s ability to detect that a person is present. The observer needs both to perceive and to recognize the wearer and then needs to be able to take appropriate avoidance action. The wearing of a conspicuity-enhancing high visibility garment does not guarantee that the wearer will be visible under all conditions.

The minimum requirements given within this International Standard are determined by the specific test methods and their assigned measuring values. The tests are partly performed on new materials and partly on preconditioned materials. By preconditioning (e.g. folding of retroreflective material) a load of the materials is simulated. However, it should be noted that laboratory testing may not represent real life conditions. The conspicuity performance of a garment will depend on usage (e.g. dirt, solar irradiation), care (e.g. cleaning agent, repair), storage (e.g. dust-free, lightproof), etc.

1   Scope

This International Standard specifies requirements for high visibility clothing which is capable of visually signalling the user's presence. The high visibility clothing is intended to provide conspicuity of the wearer in any light condition when viewed by operators of vehicles or other mechanized equipment during daylight conditions and under illumination of headlights in the dark. For further information concerning risk situations, see Annex A.

This International Standard is not applicable to medium-risk and low-risk situations.

Performance requirements are included for colour and retroreflection as well as for the minimum areas and for the placement of the materials in protective clothing.

2   Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour

ISO 105-A03, Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining

ISO 105-B02:1994, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

ISO 105-C06, Textiles — Tests for colour fastness — Part C06: Colour fastness to domestic and commercial laundering

ISO 105-D01, Textiles — Tests for colour fastness — Part D01: Colour fastness to drycleaning using perchloroethylene solvent

ISO 105-E04, Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration — Part E04: Colour fastness to perspiration

ISO 105-N01, Textiles — Tests for colour fastness — Part N01: Colour fastness to bleaching: Hypochlorite — Tests for colour fastness — Part N01: Colour fastness to bleaching: Hypochlorite

ISO 105-X11, Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing — Tests for colour fastness — Part X11: Colour fastness to hot pressing

ISO 105-X12, Textiles — Tests for colour fastness — Part X12: Colour fastness to rubbing

EN 343, Protective clothing — Protection against rain

CIE 15, Colorimetry

CIE 54.2, Retroreflection — Definition and measurement

3   Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1

high visibility clothing

warning clothing intended to provide improved conspicuity in situations where the risk of not being seen is high

3.2

fluorescent material

material that emits electromagnetic radiation at visible wavelengths longer than those absorbed

3.3

background material

coloured fluorescent material intended to be highly conspicuous, but not intended to comply with the requirements of this International Standard for retroreflective material

3.4

retroreflective material

material which is a retroreflector but which is not intended to comply with the requirements of this International Standard for background material

3.5

separate-performance material

material intended to exhibit either background or retroreflective properties but not both

3.6

combined-performance material

material intended to exhibit both background and retroreflective properties

3.7

orientation-sensitive material

material having coefficients of retroreflection that differ by more than 15 % when measured at the two rotation angles ε1 = 0° and ε2 = 90°

3.8

torso

thorax and abdomen or section of the body to which the limbs, head and neck are attached

3.9

long sleeve

(1/1 arm)

part of a garment that is completely covering the arm

3.10

road

traffic-related area with moving vehicles

EXAMPLE:

Cycling path, harbour, airport, railway track and car park.

3.11

active road user

person on the road, participating in the traffic and with the attention on the traffic

Note 1 to entry: e.g. cyclist using the road and pedestrian using the road.

3.12

passive road user

person on the road, not participating in vehicular traffic and with attention focused on something other than traffic

EXAMPLE:

Road worker, person in emergency situation.

3.13

outer shell

outermost material of which the warning clothing is made

Bibliography

[1]

ISO 3175-2, Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene

[2]

ISO 3758, Textiles — Care labelling code using symbols

[3]

ISO 3759, Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change

[4]

ISO 6330, Textiles — Domestic washing and drying procedures for textile testing

[5]

ISO 7000, Graphical symbols for use on equipment — Registered symbols1

[6]

ISO 15797, Textiles — Industrial washing and finishing procedures for testing of workwear

[7]

ISO 30023, Textiles — Qualification symbols for labelling workwear to be industrially laundered

[8]

EN 530, Abrasion resistance of protective clothing material — Test methods

[9]

EN 1150, Protective clothing — Visibility clothing for non-professional use — Test methods and requirements

[10]

EN 13356, Visibility accessories for non-professional use — Test methods and requirements

Etc

 

         温馨提示:由于ISO 20471-2013 High Visibility Clothing-Test Methods and Requirements高可视性警示服的测试方法及要求)标准信息内容太丰富,篇幅太长,耐戈友小编暂将简介内容概述如上,有兴趣或者有该方面需要的朋友,请联系耐戈友网站客服索要完整版本标准信息

下一篇:BS EN 1149-5-2008_防静电服英国/欧洲标准     本文由耐戈友整理发布,转载请注明出处!

                                                                                  链接地址 http://www.uabhs.net/?article-187.html

您是第位访问耐戈友的客人!
耐戈友品牌官网顺利通过360安全检测 手机棋牌游戏平台|手机捕鱼平台|手机千炮捕鱼|牛牛游戏下载 反光衣_反光雨衣套装_反光背心-耐戈友-职业警示反光服专业品牌!手机棋牌游戏平台